EML MANUFACTURING, LLC.

Engineered Heaters and Controls.

 

  Home

  About Us

  Products

    Electric Heaters

           Process Heater

           Immersion Heater

           Circulation Heater

           Indirect Heater

           Other Heater

     

 

    Control Panel

    Process Equipment

    Fuel Gas Conditioning

    Instrumentation

    Fabrication

    Aftermarket

 

  Technical Guide

  Contact 

   Sitemap       

                                       

 

INSTRUMENTATION

 

EML Manufacturing can supply all your instrumentation needs. From our alliance partner, we have access to a variety of instruments such as

· Temperature - RTD, Thermocouple, Bimetallic Thermometer, Thermowell, Temperature Transmitter, etc

·  Pressure - Pressure Transmitter, Pressure Gauge, Chart Recorder, etc

· Flow - Venturi, Orifice Plate, Orifiec Flanges, Differential Flow Transmitter, Flow Recorder, etc. 

·  Level - Level Gauge, Level Switch, etc. 

Our engineers have years of experience in selecting and specifying various types of instruments for Oil and Gas, Petrochemical, and the Power Generation industries. When specified, we can provide ISA data sheets (ISA-20) along with the instruments.

Do contact us for your instrumentation needs.

 

Fusible Loop Charge Panel

What is a fusible loop charge panel? A fusible loop charge panel is a pneumatic panel that monitors a fusible loop system for the detection of fire. Fusible loop system are installed on offshore platforms to detect fire. The installation of the fusible loop are in accordance with API RP 14C recommendation.

The charge panel will regulate and meter a fix amount of instrument air to the fusible loop. During a fire, the heat generated by the fire will melt one or more of the fusible plug located in or near the fire. The 'melting' of the plug will cause a release of air from fusible loop through the plug. Since the release of this regulated air exceeds the amount of regulated/metered air supply, the pressure in the loop will decrease significantly. This decrease in pressure is monitored by a pressure switch on the charge panel. The signal from the switch is then utilized to signal an alarm to the Fire and Gas System.  In addition, an additional pneumatic output is tied to the deluge valve pilot valve where it is use to open the deluge valve.

Specification for our high quality charge panel includes

a         Single zone charge panel. Panel constructed out of 316/L with full depth enclosure  on top and sides.

b         Equipped with 2 liter (0.52 gallon) capacity volume bottle with double check as a back-up to interruption of air/nitrogen supply. Volume bottle constructed out of  316/L stainless steel and design for 200 psig with hydro testing. Equipped with 316SS isolation valve and drain. 

c         All 316SS filter regulator with automatic liquid drain feature. 

d         Panel equipped with 316SS quick charge button to provide quickly and efficient start-up.

e         A 316SS low pressure cutoff switch is provided to remove air/nitrogen from the loop in the event of a fusible plug activation to ensure a failsafe system.

f          Panel is equipped with an explosion proof hermetically sealed pressure switch to indicate the activation of a fusible plug. Switch approved for Division 1 and 2; Class I, Groups A, B, C and D; Class II, Groups E, F and G Hazardous Locations. ATEX approved switch is available on request.

g         Copper free aluminum pull box provided to facilitate wiring of pressure switch.

h         2.5" Vibration resistant stainless steel pressure gauge for the indication of supply pressure. Dual scale 0 to 200 psi/(kg/cm^2) range. Equipped with 316SS isolation valve mounted on front of panel with locking provision.

i           2.5" Vibration resistant stainless steel pressure gauge for the indication of regulated pressure. Dual scale 0 to 60 psi/(kg/cm^2) range.  Equipped with 316SS isolation valve mounted on front of panel with locking provision.  

j           2.5" Vibration resistant stainless steel pressure gauge for the indication of loop pressure. Dual scale 0 to 60 psi/(kg/cm^2) range. Equipped with 316SS isolation valve mounted on front of panel with locking provision. 

k         3/8" tube connection provide with 316SS inlet isolation valve with locking provision for customer's incoming pneumatic supply.

l           3/8" tube connection provide for connection to fusible loop. 1/2" tube connection available on request.

m       Tubing are 3/8"OD x 0.049" seamless 316/L stainless steel. Tube fittings are high quality double ferrule 316SS tube fittings.

n         All wetted parts are constructed out of 316 Stainless Steel to prevent corrosion and contamination of fusible loop. 

o         Air or Nitrogen supply to range from 60 to 180 psig.

p         Size is approximately 20”W x 24”H x 8.5”D.

 

Flow Safe Pressure Relief Valve

Manufacturer of Enhanced Performance pressure relief valves, both spring-operated and pilot-operated.

 http://www.flowsafe.com/